L’Apple Watch,
Like any Apple product, can boast of aHigh finish
quality. That it is both at the level of the case and at the level of the
or bracelet (s), there is not much to complain about the materials
used and general making. Apart from the use and
features, the only shadow on the boardconcerns the
charger.
The Apple Watch is indeed provided with a very summary charger, which has the
disadvantage to undergo the effect of the weight of the cable. Difficult then to hold the
Flat pebble on your desk or bedside table for example. There is
Howeverof the
Various supports for Apple Watch charger, we saw more than 15 in this
dossierFor all tastes and especially all budgets.
For this time, we had in our hands the solution proposed by
Ugreen, which offers a product that is both visually sober,
But above all cheap and transportable. Here is noted verdict on this
New charging medium for Apple Watch.
Ugreen Apple Watch recharge support is available hereat the price
of 8.99 euros
Presentation of the support
In the box, we find the minimum union, namely the support in
question accompanied by a small macaroon including some information on the
manufacturer as well as a detailing paper manual (in French) the procedure
for correct use of the product.
Regarding the support, it is a block about 9.5 cm in diameter and
2.5 cm thick. It is made of plastic on top and below and metal
On the edges. In the center, a rubber part welcomes the cable roller
recharge.
The case opens in order to be able to house the charger thread there by wrapping it
around the central part, to let out and appear that
The USB end to plug in terms of power.
The central part is alsoremovable, but that
obviously offers no particular advantage.
Installation and use
A guide for the wire allows you to see exactly where to go with the charger and
So understand how to place the pebble. The latter finally settles
in the center of the rubber round and holds only by pressure from the latter
Between the walls.
You have to force a little to start it in the rubber. Despite this, he
turns out that the pebblecannot hold properly to
the horizontal. The strength of the twisted thread so as to enter it into the
cache is such that the pebble tends to get up and get out of
Its planned location ... it's a shame.
Regarding the recharge cord precisely, he finds himself rather twisted with
Live angles and on rather sharp plastic ends. As much
say, this support will not be adapted to a regular implementation and delivery, this
which could damage it in certain places.
Otherwise, theEverything is well in placeand to avoid too much
to twist the thread or even thwart the poor resistance of the pebble horizontally,
It is always possible to leave it vertically and thus enjoy the
Watch in Wake -up mode during its recharge.
Conclusion
In the end, with its correct finish, solid materials used and a
assembly well in place, this supportdoes his jobet
will be able to transport the set by travel without having yet another cable
that get rid of. Difficult to ask him much more in view of the price
poster.
The fact remains that he has two flaws, namely cable torsions
necessary for too tight angles, which may damage it in places,
and the fact that he applies such force to the pebble that the latter does not hold
Not in place correctly horizontal in the central part. For a
best visual rendering and a more successful design, may be better
turnverses
supports sometimes more expensive but not always, see this file with 15
models, but less risky for the duration of the life of the charging cable.
We tested the
Spigen aluminum support here
What we liked:
- cheap
- correct finish
- sobriety
- Good for use of the vertical recharge watch
What we liked less:
- PREMATURE PRESSURE OF REPHING CABLE
- does not hold well when the roller is put horizontal
Finally, don't missOur accessory tests
Recent iPhone and Watchincluding the following.
Pour l’Apple Watch :
Apple Watch Mobile Gopower Kanex charger test (and video)
Milanese mesh bracelet test for Apple Watch Jetech
Test of the traditional steel knit bracelet
Test of the “Nike+” type bracelet for the Apple Watch signed Venty at 17
euros,
And for the iPhone/iPad:
- Test :
What are the turata shells worth for iPhone 7 and 7 Plus, sold 7 euros
Qi compatible wireless iPhone recharge test, offered by the brand
Choetech
Auto charger test with Lightning Syncwire 4.8 A cable: MFI and
lifetime, 10 % reduction
Lightning Okcs extension test for iPhone/iPad: for what use
?
Test of the Lightning Rockstar Audio Belkin adapter: to load
The iPhone 7 with a trendy helmet
Apple Watch Mobile Gopower Kaxex charger test
Test of the “Nike+” type bracelet for the Apple Watch signed Venty at 17
euros, with a bright surprise!- Test
Airpods: photos and reviews after a week of use - Thermopeanut test, the small connected thermometer that keeps
always an eye on the temperature - Guardpeanut test, the small connected sensor that alerts in case
of vol
Echo mini-batteries test with integrated lightning socket- Test you
chargeur 4 ports USB SyncWire - Test you
Cigarette lighter charger 4 USB ports Aukey
Aukey Bluetooth keyboard test for iPhone, iPad or Mac- Test
Aukey woven Lightning cable
Shoulderpod S1 photo support for iPhone and other smartphones:
Pro equipment!
Milanese mesh bracelet test for Apple Watch Jetech, sold less than 17
euros
Miniaturized lighting for new iPhone and iPad cables
SyncWire : test et code promo !
Test of the USB key/Lightning Jumpdrive M20i for iPhone/iPad
Domotic: EVE Energy socket test to drive from the iPhone and iPad
(compatible HomeKit/Siri)- Test you
iclever wireless bluetooth helmet: what we are for just over 20 euros
? - Test you
"Kiné" connected for iPhone: Bluetens!
PowerCore 20100 MAH PowerCore battery test: a monster of power
For iPhone, iPad
i-nfo.fr - Iphon.fr official app
Equal: AG Tescience
Editor -in -chief for Iphon.fr. Pierre is such Indiana Jones, looking for the lost iOS tip. Also long -standing Mac user, Apple devices have in short, no secrets. Contact: Pierre [a] Iphon.fr.